Applied Mathematics and Mechanics (English Edition) ›› 2019, Vol. 40 ›› Issue (4): 563-578.doi: https://doi.org/10.1007/s10483-019-2469-8

• 论文 • 上一篇    下一篇

Rotating sandwich cylindrical shells with an FGM core and two FGPM layers: free vibration analysis

R. KARROUBI, M. IRANI-RAHAGHI   

  1. Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan, Kashan 87317-51167, Iran
  • 收稿日期:2018-07-01 修回日期:2018-10-13 出版日期:2019-04-01 发布日期:2019-04-01
  • 通讯作者: M. IRANI-RAHAGHI E-mail:irani@kashanu.ac.ir

Rotating sandwich cylindrical shells with an FGM core and two FGPM layers: free vibration analysis

R. KARROUBI, M. IRANI-RAHAGHI   

  1. Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan, Kashan 87317-51167, Iran
  • Received:2018-07-01 Revised:2018-10-13 Online:2019-04-01 Published:2019-04-01
  • Contact: M. IRANI-RAHAGHI E-mail:irani@kashanu.ac.ir

摘要:

The free vibration analysis of a rotating cylindrical shell with an analytical method is investigated. The shell is considered as a sandwich structure, where the middle layer is a functionally graded material (FGM) shell, and it is surrounded by two piezoelectric layers. Considering piezoelectric materials to be functionally graded (FG), the material properties vary along the thickness direction as one innovation of this study. Applying the first-order shear deformation theory (FSDT), the equations of motion of this electromechanical system are derived as the partial differential equations (PDEs) using Hamilton's principle. Then, the Galerkin procedure is used to discretize the governing equations, and the present results are compared with the previously published results for both isotropic and FGM shells to verify the analytical method. Finally, the effects of FGM and functionally graded piezoelectric material (FGPM) properties as well as the thickness ratio and the axial and circumferential wave numbers on the natural frequencies are studied. Moreover, the Campbell diagram is plotted and discussed through the governing equations. The present results show that increasing the non-homogeneous index of the FGM decreases the natural frequencies on the contrary of the effect of non-homogeneous index of the FGPM.

关键词: sandwich structure, power-law fluid, eccentric laminar helical flow, flow rate, pressuer loss, velocity, apparent viscosity, functionally graded material (FGM), functionally graded piezoelectric material (FGPM), rotating shell, vibration

Abstract:

The free vibration analysis of a rotating cylindrical shell with an analytical method is investigated. The shell is considered as a sandwich structure, where the middle layer is a functionally graded material (FGM) shell, and it is surrounded by two piezoelectric layers. Considering piezoelectric materials to be functionally graded (FG), the material properties vary along the thickness direction as one innovation of this study. Applying the first-order shear deformation theory (FSDT), the equations of motion of this electromechanical system are derived as the partial differential equations (PDEs) using Hamilton's principle. Then, the Galerkin procedure is used to discretize the governing equations, and the present results are compared with the previously published results for both isotropic and FGM shells to verify the analytical method. Finally, the effects of FGM and functionally graded piezoelectric material (FGPM) properties as well as the thickness ratio and the axial and circumferential wave numbers on the natural frequencies are studied. Moreover, the Campbell diagram is plotted and discussed through the governing equations. The present results show that increasing the non-homogeneous index of the FGM decreases the natural frequencies on the contrary of the effect of non-homogeneous index of the FGPM.

Key words: power-law fluid, eccentric laminar helical flow, flow rate, pressuer loss, velocity, apparent viscosity, functionally graded piezoelectric material (FGPM), rotating shell, vibration, sandwich structure, functionally graded material (FGM)

中图分类号: 

APS Journals | CSTAM Journals | AMS Journals | EMS Journals | ASME Journals